From left to right: Riser tube with elbow, (D = 48 mm), Feed pipe, (length 1800 mm),
above: launder, (length 1350 mm), Protective tube, (height 320 mm, D = 250 mm), Feeder box, (560 x 560 mm²)

Production parts for aluminum casting

Production parts for alu­min­um casting were made of “Keramikblech” type SvM1514N and the surface hardenend type SvM1514N-Z. On cus­tom­ers request the com­po­nents were coated with boron nitride to get a better protection against alu­min­um. Beside the very good damage tol­er­ance and thermal shock tol­er­ance the advantage is a good isolation, a good protec­tion against alu­minum and reduced main­te­nance expenses.

The following part are successful in operation:

  • protective tubes
  • launders
  • risers
  • feeder box and casting pans
  • plump sword

Please click to enlarge